Alfa Peb Limited

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

 

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

2.5mm Sigma Purlin are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls and eve struts at the intersection of side walls and roofs.

Alfa purlins, girts and eave struts are designed in accordance of the American Iron and Steel Institue (AISI) then cold formed design manual.

Sigma section / Purlins are accurately roll formed from high strength steel to provide an efficient, light weight and economical roofing and cladding support system for structural steel buildings. Sigma section / purlins are quick to install and suitable for both insulated and noninsulated roofs and walls. The thickness and height of the purlin selected depend on span length and loads.

Specifications:

• Yield Strength: 240 MPA, 340 MPA
• Available Coating: 180 GSM, 275 GSM
• Thickness 1.5–3.0 mm

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized

Alfa purlins girts & eve struts are secondary structural members used to support the wall and roof panels. Alfa purlins are used on the roof, girts are used on the walls, and eve struts at the intersection of sidewalls and roofs. Alfa purlins, girts, and eave struts are designed following the American Iron and Steel Institute (AISI) then cold-formed design manual. Alfa sections may be used over single spans unlapped continuously and lapped continuous span in multi-bay buildings. Alfa Z&C purlins are available in two Standard Finishes i.e., Red Oxide, Galvanized