Sandwich Panels

Product Details:

100 mm Sandwich PUF Panel are combining low thermal conductivity ratio and good fire performance, this energy efficient PIR core panel both saves on heating costs and increases fire safety. Thanks to low weight this panel also offers savings on supporting structures as well as on freight and assembly costs. Ideal way to insulate any home or industrial premises and give higher thermal resistance is to have it insulated through particular roof insulation material. It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work.

Specifications:

• Reference Standards: ASTM, A 7555 (JIS 63312, IS14236, ECCA)
• Product Variants: PPGI/PPGL Steel Sheets Coils
• Yield Strength: 240/550 for Gr80
• Coating Mass: 120,AZM 150 as per ASTM Std.

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Specifications:

• Available Panel Thickness: 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm
• Sheet Thickness (mm): 0.5/0.5, 0.5/0.4, 0.4/0.4, 0.4
• Length: 2.5mts to 20mts

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Specifications:

• Available Panel Thickness: 30mm, 50mm, 60mm, 80mm, 100mm, 120mm
• Sheet Thickness (mm): 0.4, 0.45/0.4, 0.45/0.3, 0.4/0.4, 0.4/0.3, 0.35/0.3, 0.3/0.3
• Length: 2.5mts to 20mts

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 40mm, 30mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Thickness:

• 20mm, 30mm, 40mm, 60mm, 80mm, 100mm, 120mm

Product Details:

 

1.      Negligible Water/Moisture Absorption.

2.      Heat insulation.

3.      Sound reduction.

4.      Resistance to Fungi.

5.      Chemically unreactive.

6.      Wide operating temperature.

7.      Stable K Value.

8.      Maintenance free.

9.      Light weight & Easy to install.

10.  Ecofriendly

Applications:

 

1. Industrial Buildings.
2. Commercial Buildings.
3. Warehouse/Godown.
4. Farm House.
5. Poultry Form.
6. Dairy industry.
7. Malls/Departmental Stores.

 

 

Additional Information:

• Delivery Time: 5 days

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50 mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Specifications:

• Available Panel Thickness: 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm
• Length: 2.5mts to 20mts

Product Details:

Specifications:

• Available Panel Thickness: 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120 mm
• Sheet Thickness (mm): 0.5/0.5, 0.5/0.4, 0.45/0.4, 0.45/0.3, 0.4/0.4, 0.4/0.3, 0.3/0.3
• Length: 2.5mts to 20mts

Product Details:

Specifications:

• Available Panel Thickness: 30mm, 40mm, 50mm, 80mm, 100mm, 120mm
• Length: 2.5mts to 20mts

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Specifications:

• Available Panel Thickness: 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm
• Sheet Thickness (mm): 0.5/0.5, 0.5/0.4, 0.45/0.4, 0.45/0.3, 0.4/0.4, 0.4/0.3, 0.35/0.3

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter. 
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120 mm

Product Details:

Alfa Sandwich Panels Manufacturing ProcessThe top and bottom coil (sheet metal) are clamped onto the plants unwinding unit and fed into the machine. In the first step, “corona system” cleans both reverse sides of the sheet metal using high frequency to remove greases and dirt and to guarantee the best possible subsequent full spread adhesion between foam and sheet metal. Thereafter the protective films are rolled onto outside of both metal sheets. The sheets are then brought together, the bottom sheet is foamed by the swinging foam head and the top sheet is mechanically steadied. Immediately after that, the panel is fed into the heated drying tunnel where the foam expands to its full volume, binds to the sheets and transforms both sheets to one robust, shear resistant composite structural panel. After leaving the tunnel the panels are cut according to your specification using flying saw/cutter.
Available Panel Thickness:

• 30mm, 40mm, 50mm, 60mm, 80mm, 100mm, 120mm